You spent three weekends on it. The dining table has been off limits since September. Someone lost a piece under the couch and you found it at 11pm. And now it's done.
Breaking it up and putting it back in the box feels wrong. Good news: you don't have to. A finished jigsaw puzzle frames beautifully, and done properly it'll look like a piece of art, not a craft project that got out of hand.
Here's how to get it from the table to the wall without losing your mind (or a corner piece).
Step 1: Prep it at home
The goal is simple: turn 1,000 loose pieces into one solid sheet. You've got three options.

Option 1: Puzzle glue. Brush a thin layer of puzzle glue over the face, working it into the gaps. Let it dry fully (check the bottle, usually a few hours), then do a second coat if it still feels loose. It's cheap and easy, but it adds a sheen and can leave streaks if you go heavy.

Option 2: Puzzle saver sheets. These are adhesive sheets that stick to the back. Flip the puzzle carefully (sandwich it between two boards to do this), peel and stick. No shine on the front, but flipping a 1,000 piece puzzle is not for the faint hearted.
Option 3: Do nothing. Seriously. If you're nervous about glue, leave it as is and talk to us first. The right mounting and a well fitted glass front can hold a puzzle in place without you touching it.
Whichever way you go, measure the finished puzzle with a tape measure before you do anything else. Don't trust the size on the box. Puzzle sizes vary between brands and we'll need the real number.
Step 2: Get it to us in one piece
This is where most puzzles die. A few rules:
- Slide, don't lift. Slide a sheet of baking paper under the puzzle, then slide that onto a piece of stiff cardboard or foam board bigger than the puzzle.
- Sandwich it. Put a second board on top and tape the edges together.
- Keep it flat. Never roll a puzzle, even a glued one. It goes flat on the back seat or in the boot, not propped against the door.
- Bring the box. We like seeing the original image, and it's handy if any pieces need rescuing.
Pieces came loose on the way? Don't panic. Bring them in a zip lock bag and we'll sort it.
Step 3: How we frame it
Once it's on our bench, there are four decisions. We'll walk you through all of them in store.
Mounting. We mount the puzzle onto a rigid, acid free backing board so it stays flat and doesn't sag over time. This is the bit that turns a pile of cardboard into something that lasts.
Mat board. A mat border gives the puzzle room to breathe and makes it look finished. Pull a colour from the puzzle (the sky, a shadow, the darkest tone) and it'll pop. Skip the mat if you want a clean, edge to edge look.
Glass. Real glass keeps dust off and holds everything snug. Puzzle images are printed with ordinary inks, so if it's going anywhere near a window, ask about UV protective glass. Townsville sun fades things fast.
Moulding. Big puzzles are heavy. A 1,000 piece puzzle with glass needs a frame that can carry the weight without bowing. We'll steer you towards a profile that's strong enough and suits the image, whether that's a slim black, a natural timber or something with a bit more personality.
Then we tape around the back to keep the dust and bugs out, fit quality hanging hardware, and it's ready for the wall.
Mistakes we see all the time
- Using craft glue or PVA straight from the bottle. Too thick, too wet. It warps the pieces and dries cloudy.
- Buying the frame first. Puzzles rarely fit standard frame sizes. Measure, then frame.
- Rolling it up for the car trip. See Step 2.
- Hanging it in full sun with standard glass. In two summers that bright blue sky will be a sad grey.
- Cheap frames for big puzzles. A thin, flimsy frame will bow under the weight and the glass. Worth spending a little more here.
FAQ
Do I have to glue my puzzle before framing? No. Talk to us first. Depending on the puzzle, we can mount it without glue.
Can you frame a 2,000 or 3,000 piece puzzle? Yes. If it fits through the door, we can frame it. Bigger puzzles just need a stronger moulding and a bit more planning.
How long does it take? It depends on the moulding and what's on the bench. Ask in store and we'll give you a date.
How much does it cost? It comes down to size, mat, glass and moulding. Bring it in or send us the measurements for a quote.
Can I frame a puzzle I've already glued? Absolutely. Most of the puzzles we frame come in glued.
Too good for a drawer (or a box)
You put the hours in. Give it a proper spot on the wall.
Bring your puzzle to Townsville Art & Framing at Domain Central, Garbutt. We're open Monday to Friday 9am to 5:30pm and Saturday 9am to 4pm. Not ready to bring it in yet? Call us on 07 4775 3347 or email sales@townsvilleartandframing.com.au with the measurements and we'll point you in the right direction.


